Re: IML: '67 Carter carb flat spot
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: '67 Carter carb flat spot



Unless you are aware of your A/F ratio you will be fumbling in the dark.  Try to find a performance tuning shop that will read the ratios and have a bunch of other stuff hooked up to the engine.  Your local Mopar club may be able to point you in the right direction.  The tuners will be able to make the proper jet/rod/spring combo recommendations.  Once you have that basic setup you can fiddle with it from there.  Otherwise any change you make could well send you in the wrong direction.  Ten to one they also find some other little things that will help you a lot.
 
From your initial post about having flatness between 1/3 and 2/3 throttle, it sounds like you are in the range where the secondaries should be opening.  So many things are happening at that RPM range that you need to have your A/F ratio correct before trying to adjust anything else.  You need to be sure that the linkage to the secondaries is adjusted to spec so they are opening when they should, and then you can fiddle with the adjustable secondary vacuum flap which governs the smooth transition from two to four barrels.  There is a delay between when the throttle plate opens and when gas actually starts to be pulled through the secondary barrels.  The stiffer your vacuum flap, the longer the delay.  That should be just a short bog, though, not a flat spot.
 
I concur that you are likely running lean, which is not a good thing with today's low octane gas and your high compression engine.  When in doubt, run a little rich.
 
 


Happy motoring,

David

'91 K-Imperial driver 200,000 miles
'66 LeBaron dual air and every option known to man

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.