Re: IML: voltage regulator contacts burning
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: voltage regulator contacts burning



Try a new filter (capacitor) across the leads.



David C. Wilker Jr.
USAF (RET)


----- Original Message ----- From: "Chris Strohmeyer" <chrisstroh@xxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Sunday, November 11, 2007 11:10 AM
Subject: IML: voltage regulator contacts burning


What would cause this? They burn a little pointed shard across them and they start sticking. I've tried a new regulator and the same thing. The alternator was changed recently too.

Thx,
Chris Strohmeyer
67 Imperial Convertible

-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.