Re: IML: Electric Window Repair
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: Electric Window Repair



I do make new cogs for the 1960 chrysler, maybe they are the same? I make them from machineable resin with a wire moulded inside for extra strength. When I had my F years ago I remember the cogs broke in half. So if they are the same cog ( 28 angled theeth and steps on the inner ) I do make them, regards George.
georgelaurie@xxxxxxxxxxx
----- Original Message ----- From: "Ken Lang" <imperialken@xxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Thursday, February 14, 2008 2:28 AM
Subject: IML: Electric Window Repair


I'm usually pretty good about finding resources for parts and repair
stuff, but today, I'm drawing a blank. (I'm sure it has a lot to do
with age, mine not the Imperial's)

The driver side electric window on my 67 Crown quick working recently.
I was able to move the window up and down manually so I suspected the
plastic gear in the motor housing was broken.  After taking it apart
last night I discovered my suspicions were correct.

I remembered seeing posts from other members regarding this topic in
the past and the mention that repair kits were available at one of the
major-chain parts houses like Kragen or Napa.  Well I unsuccessfully
searched Kragen, RockAuto, PartsAmerica and Napa.  I got nothing.
Then I searched the club web site looking for information regarding
electric window repair and again I turned up nothing.  I'm sure the
information is there, it's just a user-interface issue.  (me the user,
not interfacing well with the computer)

Does someone with a memory better than mine know where I can find that
little plastic gear?

Thanks

Ken
67 Crown 4 Dr Ht
68 LeBaron 4 Dr Ht

-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.