Re: IML: 59 Imperial crown starter boot?

----- Original Message -----

From: Rob van der Es

To: mailing-list@xxxxxxxxxxxxxxxx

Sent: Tuesday, February 26, 2008 4:51 PM

Subject: Re: IML: 59 Imperial crown starter boot?

That will be great David,

Please count me in for a stater boot too!

Please let me know if they have more of them on the self.

There might be other folks interested too, so maybe you can put some details about the vendor on this list then.

Thanks,

Rob

----- Original Message -----

From: david carpenter

To: mailing-list@xxxxxxxxxxxxxxxx

Sent: Tuesday, February 26, 2008 7:42 PM

Subject: Re: IML: 59 Imperial crown starter boot?

I have found a source for NOS boots, If they jhave extra I will post the number, David

----- Original Message -----

From: Rob van der Es

To: mailing-list@xxxxxxxxxxxxxxxx

Sent: Sunday, February 24, 2008 5:35 AM

Subject: Re: IML: 59 Imperial crown starter boot?

Hi Tom and David,

Yep, the 59 and 60 starters are the same (and quite hard to find these days..) and they do have a rubber boot over the fork to protect the mechanism from moisture, dust etc.

I am still looking for a new boot too, but without success so far.

Maybe Gary Goers have them? Since he is the guy that duplicates lots of rubber Chrysler/Imperial parts he might also have this item.

I will check his catalog, the reason that I didn't do that earlier is the fact that Gary is not the fastest shipper in the world....(to put it nicely :)

So if anyone on the list knows a source for those rubber starter fork boots, please let us know!!

Rob

1960 Crown 4dr HT

----- Original Message -----

From: Tom Scott

To: mailing-list@xxxxxxxxxxxxxxxx

Sent: Sunday, February 24, 2008 12:51 AM

Subject: Re: IML: 59 Imperial crown starter boot?

I believe the 59 and 60 starters are the same and it does have a rubber boot over the fork. I couldn't find one when I had my starter rebuilt.

Tom

60 Crown

----- Original Message -----

From: david carpenter

To: mailing-list@xxxxxxxxxxxxxxxx

Sent: Saturday, February 23, 2008 6:03 PM

Subject: IML: 59 Imperial crown starter boot?

I am rebuilding my 1959 Imperial Crown starter. Does this starter come with a rubber boot to protect the solenoid to starter gear fork? If so, does anyone know of a source for new rubber boots? I bought an NOS boot for another Plymouth that I have and the rubber ( being 46 years old ),

was very rigid. When I removed my starter from the engine on the 59 Imp. it did not have any rubber.

Thanks, David