Re: IML: IML DIGEST
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: IML DIGEST



If the battery is fully charged, it is probably the starter contact.  You
might try disconnecting the battery, then loosen the 1/2" (or 9/16") nut
that holds the large cable to the starter stud.  Then tighten the stud nut
right at the starter.  Sometimes these work loose and will cause the
"click".
If still a no-go, then the contact stuff needs to be replaced.  Either that
or the whole starter.  Improvements in this area were made on later models
and a current rebuilt model will have them.  Ask for part number 3257.  A
3258 will also fit, and is a better starter (more HP I believe).

Regards,
DaveG.
----- Original Message ----- 
From: <PompRocker@xxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Saturday, September 25, 2004 7:44 PM
Subject: Re: IML: IML DIGEST


> My 63 chrysler wont start all i get is a clicking sound when i turn the
> key...whats wrong?
>




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.