I'd like to thank everyone for the advice. I went ahead and ordered a Matco
puller from my local car parts store.
Bruce Clough
>Bruce,
> I have one of the original pullers that I purchased from the dealer I
>worked in when it closed. It looks alot like a big steering wheel puller,
>with 3 stirrups that bolt to wheel studs, then the screw is tightened against
>the end of the axle. There is a captive mallet head arm that goes over the
>hex on the screw, which you then procede to beat on with you favorite hammer
>and pull the drum from the axle.
> Crude but effective.
> I'm not sure if this is the Miller tool, but it's what we used there.
> If you can't rig something up, or need more info, or need to borrow the
>puller, let me know.
>
>Steve
|
|
Back to the Home of the Forward Look Network