Re: [FWDLK] Need help ID'ing this part #1673968

[David Homstad <Dhomstad@xxxxxxxxxxx>]

Gary,

If the number you have is cast on the part, it is most likely a casting
number and not the final part number that would appear in the Parts Book.
Sometimes a casting can be made into more than one part number. In the case
of a horn ring or cap, it might be chromed, painted, or have different
emblems applied. Each variation would be a different part number, but only
the casting number would appear on the part. If a casting is delivered
completely machined or chromed by the supplier and ready to install, and
there is only one variation, then the casting number may also be the final
part number.

Dave Homstad
56 Dodge D500

-----Original Message-----
From: Forward Look Mopar Discussion List
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx]On Behalf Of Roger Howard
Sent: Thursday, March 14, 2002 9:50 PM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: Re: [FWDLK] Need help ID'ing this part #1673968

I dont find it in the catalog; it is  one digit off from a 57 Ply horn ring
----- Original Message -----
From: Gary Pavlovich <mailto:glpavlovich@xxxxxxx>
To: L-FORWARDLOOK@xxxxxxxxxxxxx <mailto:L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Thursday, March 14, 2002 6:24 PM
Subject: [FWDLK] Need help ID'ing this part #1673968

Mopar List,  Can anyone identify this part #1673968; it is supposedly a horn
ring for early Mopar.
Thank you,
Gary Pavlovich

-- -- -- -- -- -- -- --
Calendars are still available.  Don't miss the chance to get yours now!
Details for ordering may be found at:
http://www.forwardlook.net/calendar2002/index.html