In a message dated 5/9/03 12:35:36 AM Eastern Daylight Time, stillamc@xxxxxxxxxxxxx writes:Has anyone ran into this problem before, and if so, what did Go to the automobile parts store of your choice and get a "Helicoil" kit. It will have the proper sized drill, special tap and replacement threads that screw right into the old holes to bring the screw size pack to correct. USE LOTS OF OIL, and don't forget to back the tap up every turn or so to break the chips off so they don't clog the hole. Blow the chips out of the hole before you attempt to insert the helicoil, using the special tool. (You MAY have to buy the tool separately.) There may be other brands (Keensert is one) of replacement thread inserts to use--ask the counterman. The other option would be to drill the hole larger and thread for the next larger screw, if you have room. Joe Savard, Lake Orion, MI |
Back to the Home of the Forward Look Network