|
Hello All,
I disassembled my vent windows for rechroming, polishing,
sandblasting and painting. When I took them apart, I noticed there were the
remains of a window channel/sweeper. They were badly rusted and all the material
was gone. Does anyone know of a good source for these? They fit inside of the
vent window frame. This would be for a '59 sedan.
I'm also looking for trim clips
to hold the large roof rail moldings on a sedan.
While I'm at it, does anyone
have one or two 14x6.5" wheels that they would like to part with? I purchased
three off of a '59 New Yorker but I need two more as the others were rusted
around the bead of the rim and I'm not risking it. Let me know. Also am I
correct on that wheel size or did New Yorkers have 14x6" wheels. I need this
confirmed.
As
to the faceplates, I have the plates cut out but I'm looking for punches to cut
out the switch holes. Does anyone know of a source for such punches? I have
access to a machine that will punch the holes but I need the proper punches.
Thanks for all of your help guys
and gals. Talk with you later.
Take Care,
Frank
| 
Back to the Home of the Forward Look Network