Re: [FWDLK] what rear drum setup to use?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] what rear drum setup to use?



E bodies could come with either 11" or 10" rear drums.  I have an E body
8.25 housing if you'd like for me to measure the width, perch width, etc so
you can see if one would fit just let me know.



Bill & Kathi Parker, South Central Indiana
'60 Chrysler Saratoga; '62 Plymouth Max Wedge; '64 Dart convertible (Kathi's
car); '65 Barracuda \6 (Kathi's other car); '65 Imperial; '68 Barracuda FB
340-S; '69 Barracuda FB now 360 (David's car); '72 Cuda '340





From: Lou <email4lou@xxxxxxxxxx>
Reply-To: email4lou@xxxxxxxxxx
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] what rear drum setup to use?
Date: Wed, 25 Feb 2004 13:53:47 -0500

Hi all,

when I do my brake conversion, I think I am also going to swap in an E-body
rear so that I can put later model rear drums on, since those parts will be
more readily available in the future, and I'll get self adjusting brakes
out of the deal.

I have the rear, but I'm not sure whichdrums/backing plates to use.
something tells me that E-body drums will be too small.  Will Full size
drums be too big?  Which letter to use...hmmm b,c, e...  Has anyone done
this swap?

thanks,
Lou

_________________________________________________________________ Find and compare great deals on Broadband access at the MSN High-Speed Marketplace. http://click.atdmt.com/AVE/go/onm00200360ave/direct/01/



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.