Re: [FWDLK] Oil Pump Priming Tool

[Nathan Nuttall <nnuttall@xxxxxxxxxxx>]

The early Chrysler hemi pumps are different and are the slotted screwdriver type. Don't know when they changed it to the hex version. I suspect that the early Dodge polys and hemis are the same as the Chrysler hemis and polys but I have never seen one to be sure. Perhaps it changed with the introduction of the 277-318 Plymouth poly? Sorry for the confusion.

Nathan Nuttall


> -----Original Message-----
> From: Dave Casey [mailto:dcasey@xxxxxxxxxxxxx]
> Sent: Thursday, September 30, 2004 8:10 PM
> To: L-FORWARDLOOK@xxxxxxxxxxxxx
> Subject: Re: [FWDLK] Oil Pump Priming Tool
>
>
> Big and Small block oil pumps (426 hemi and polys included)
> use a 3/8" hex
> shaft for priming. I thought the early Hemis were the same
> but can't be
> certain....

> Dave Casey

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1