Re: [FWDLK] poly 318/poly motor headers

[Dave Grove <dave@xxxxxxxxxxxxxxxxxxx>]

Nor will they clear the torsion bars.  Seems like every set of headers ever
made end up right in the middle of them.  I went through this on my 59
Plymouth (383 engine).

Regards,
DaveG.
----- Original Message -----
From: "Dave Casey" <dcasey@xxxxxxxxxxxxx>
To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Sunday, November 07, 2004 6:10 AM
Subject: Re: [FWDLK] poly 318/poly motor headers


Word is, they won't clear Floating Power motor mounts, at least on one side
anyway.

Dave Casey
 ----- Original Message -----
 From: Forward Look Frank
 To: L-FORWARDLOOK@xxxxxxxxxxxxx
 Sent: Sunday, November 07, 2004 4:38 AM
 Subject: [FWDLK] poly 318/poly motor headers


 Hello Everyone,
                         Just checked out the January edition of Mopar
Muscle. Seems that TTI is making headers for the poly 318. Right now it
seems as though they're just geared for '62-'66 B body and '65-'66 C Body.
They have 3/8" flanges 1.75" primaries and a 3" collector. They are ceramic
coated and feature a thermal barrier inside and come with all need
hardware/gaskets. My question is, I wonder if they'll fit our cars? If not,
maybe we can convince TTI to make some for us. Just a thought.
 -Frank

 *************************************************************

 To unsubscribe or set your subscription options, please go to
 http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1