|
I started to work on my car as soon as it arrived at my home. It been
out in the weather for about a year before I at least built my carport.
All this time it was subject to the weather. During this time I used Gray
Duplicolor Primer. Over time like clock work a week after the rain
rust started to become visible. So then I started using Red Duplicolor
Etching Primer. This stuff had better protection it took me about 2 coats
and I was good to move on. The Gray primer I would coat a part around 4
times and time after time surface rust appeared. For those members out
there I recommend using this Self Etching Primer to buy you some
time.
Rocker Panels: I bought some rocker panels from the INFAMOUS JC
WHITNEY! LOL!!! I am very satisfied with them. They fit right
on the money. There is just one problem there are no drain holes for the
rain water to go thru. Any one out there know the hole size they are
supposed be? Hole distance? Anyone out there know how to install a
drip rail behind the rocker panels? Furyworld v5.0 - '57
Resto: Page 1 Greg speaks of the drain pipe on page 5. Anyone
make inner rocker panels?
HAPPY HOLIDAYS!
THANKS FOR THE GREAT YEAR!
Joey
Dickinson, Texas
1957 Plymouth Savoy
*************************************************************
To unsubscribe or set your subscription options,
please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
| 
Back to the Home of the Forward Look Network