Re: [FWDLK] intake manifold restoration
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] intake manifold restoration



Well, I'm 2 for 2 with no valley pans and one was a 361 out of my 65 Belvedere.
I just assumed they weren't factory but I guess my engines weren't both factory fresh.
I guess mine were the other way around.
My mistake, sorry folks!
 
Tom
----- Original Message -----
Sent: Monday, February 28, 2005 10:32 AM
Subject: Re: [FWDLK] intake manifold restoration

In a message dated 2/28/2005 9:15:39 A.M. Eastern Standard Time, 6t4belvedere@xxxxxxxxxxx writes:
WOW!  A factory installed valley pan!  I'm no expert but all I've ever seen
is fiberglass insulation stuffed under the intake to keep it cool.
Maybe someone in the past 47 years removed the intake and reinstalled it
with a valley pan.
Nope, that's the way they were when brand-shiny new!  think of how much money the factory saved by combining the gaskets with the valley pan.  No separate bolts and gaskets for the valley pan, fewer holes to drill and tap in the block and one part number instead of three!  Really a great idea, as far as I'm concerned.
 
Save a buck on an engine, build 30,000 engines and save $30,000!
 
Joe Savard
Lake Orion, MI

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.