Re: [FWDLK] Mopar Parts supplier
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Mopar Parts supplier



Perhaps a good alternative would be to put a coating of spray-on bed liner.
It's tough and durable and should at least help with some of the less
dramatic wear and tear, such as sand and gravel.

----- Original Message -----
From: "William Huff" <wbh@xxxxxxxxx>
To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Thursday, April 07, 2005 12:43 PM
Subject: Re: [FWDLK] Mopar Parts supplier


I actually did email the vendor and they said that they didn't know anyone
who supplied armor on their lines.  Good thing none of my cars are
concours.

Bill Huff



At 4/5/2005 10:58 AM, Ray Jones wrote:
Since all lines are made to order, they might install the armor if asked
to.

Regards, Ray

On Apr 5, 2005, at 1:28 AM, William Huff wrote:

I got some lines from him, they look pretty good although I haven't
installed them yet.  the biggest disappointment is that since the ends
are
already flared, you can't put any spiral armor on the brake lines.

Bill Huff




At 4/4/2005 11:05 PM, Ray Jones wrote:
Hi Scott;
That's why I included the info I did. read it all, and call the 800
number if you have questions. It's nearly impossible to ship pre-bent
brake lines. The claim is that they are easily bent with out kinking.
Yes, you can get them in any parts store, but these are said to be the
correct length, with the correct ends. And where needed, the correct
couplers.
I thought that it looked like a good source of lines at a reasonable
price.
Regards, Ray


On Apr 4, 2005, at 1:11 PM, Scott H wrote:


Here is the catch "Shipped straight, you bend as needed" "Couplers are
included
where necessary"
Sounds like a handful of straight tubing that you can get in any auto
parts
store.

You ALWAYS have to read e-bay ads carefully.


Scott





----Original Message Follows---- From: Ray Jones <hurst300@xxxxxxxxxxxx> Reply-To: Ray Jones <hurst300@xxxxxxxxxxxx> To: L-FORWARDLOOK@xxxxxxxxxxxxx Subject: [FWDLK] Mopar Parts supplier Date: Mon, 4 Apr 2005 12:06:22 -0500

Hi Guys; Check out this seller on eBay:
chrysleroldtimeparts

Put that name in "advanced search", using the "use sellers ID" box

What lead me there is, he has several auctions on complete brake line
kits. With new maliable tubing and  all fittings. Item description is
here:

This is a complete brake line replacement kit. All lines are supplied
double-flared at each end with S.A.E. specified male inverted flare
fittings attached -- ready for quick easy installation. All brake lines
have an extra long nut on one end to seat in late model deep-seated
wheel cylinders. These maliable lines are easy to bend or coil without
collapsing the tubing or restricting the flow of brake fluid. A chart
of your brake system is included and all lines are clearly marked and
numbered as to where they should be installed. Couplers are included
where necessary.

These are made up for your car model for $35. and shipping is $12., per
these auctions now on. Shipped straight, you bend as needed.

Sounds like a good deal to me, and would save much scrounging for
lines. I haven't used them yet, but am gonna try'em.

Regards, Ray

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************


To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************


To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************


To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1


*************************************************************


To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.