[FWDLK] Front crossmember brake line (again)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[FWDLK] Front crossmember brake line (again)



Hi everyone,

Sorry to bother you again with my request for a front crossmember brake line
routing picture, but I got no answer so far (see message below).

Thanks.

Vincent

================================================

Hi everyone,

I received a week ago new pre-bent stainless steel brake lines from Inline
Tube for my '58 Plymouth. I started unpacking today and tried the two brake
lines at the front for fit. The small one (left) is correct but I cannot
seem able to find the correct routing for the longer one (right - from right
wheel to master tee) and begin to wonder if it is correctly bent. I must say
that my car had no longer the original brake lines anymore so I miss a
reference. Can someone help me by sending me a sharp picture of the routing
of an original brake line (or restored) over the frame and along the front
crossmember and then to the master tee ?

Thanks.

Vincent Van Humbeeck
'58 Plymouth Belvedere 2-door hardtop coupe

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.