Re: [FWDLK] Bearing Stuck
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Bearing Stuck



Did you pack the bearing before you put them in?
David Wallace
58 Fury
----- Original Message ----- From: "Ron Waters" <ronbo97@xxxxxxxxxxx>
To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Friday, July 22, 2005 5:56 PM
Subject: [FWDLK] Bearing Stuck



Hi List -

I am doing the brakes on my 58 Ply. When I pulled the drums a couple of
years ago, before remounting I installed brand new inner and outer
bearings, as well as the inner seal, and then greased everything. Today,
when I went to remove the front drums, one had difficulty coming off. When I
finally removed it, the seal and inner bearing remained on the steering
knuckle. I had great difficulty removing the bearing but eventually got it
off (will probably replace it, considering it's importance). Why would a
brand new bearing get stuck like this ? Poor manufacture ? The other side
came off with no problem.


Ron

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1


*************************************************************


To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.