[FWDLK] Bearing Stuck

[Ron Waters <ronbo97@xxxxxxxxxxx>]

Hi List -

I am doing the brakes on my 58 Ply. When I pulled the drums a couple of
years ago, before remounting I installed brand new  inner and outer
bearings, as well as the inner seal, and then greased everything.  Today,
when I went to remove the front drums, one had difficulty coming off. When I
finally removed it, the seal and inner bearing remained on the steering
knuckle. I had great difficulty removing the bearing but eventually got it
off (will probably replace it, considering it's importance). Why would a
brand new bearing get stuck like this ? Poor manufacture ? The other side
came off with no problem.

Ron

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1