HELLO LIST !
I AM TRYING TO ID WHAT MOTOR I HAVE IN MY 57 BELVERERE WITH YOUR HELP.I AM NOT SURE IF IT IS A 301 ,313 , 318. I AM THINKING IT IS A 313 OR 301POLY, BUT WOULD LIKE TO NO FOR SURE CORRECT SIZE. THE MOTOR SERIAL# STAMPED ON THE BLOCK IS KV-33366C , CASTING # ON TH E BLOCK IS1576328.
ALSO I HAVE ANOTHER QUESTION FOR 1957 PLYMOUTH OWNERS . I HAVE INSTALLED A CLOCK THAT I PICKED UP OUT OF AN INSTRUMENT POD COMPLETE .I REMOVED THE CLOCK AN INSTALLED IN MY POD. THE PROBLEM IS THAT THE RESET CABLE FOR THE CLOCK DOES NOT REACK THE HOLE IN THE UNDERSIDE OF THE DASH BELOW THE IGNITION SWITCH,THE CABLE IS ABOUTH 2 INCHES SHORT ASSUMMING THAT IT IS SUPPOSE TO FIT IN THAT HOLE IN THAT LOCATION. I HAVE A COULPE OF OTHER CLOCKS AND CABLES AND THEY ARE THE SAME LENGTH. I HAVE CHECKED THE PICTURES AND SALES BROCURES BUT CAN'T SEE ANY PICTURES OF THE CABLE UNDER THE DASH ,OR DO I HAVE TO DRILL A NEW HOLE SOME WHERE FOR THE CABLE. ANY HELP AS TO WHERE THE HOLE SHOULD BE CORRECTLY LOCATED, WOULD BE APPRECIATED. THANKS WAYNE
1957 Plymouth 2 dr ht
1959 DeSoto 2 dr ht
1960 Plymouth Fury 2 dr ht
Back to the Home of the Forward Look Network