Re: [FWDLK] Limeys !!!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Limeys !!!



HelloList! The stuff your asking about is CLR Rust and Calcium Remover will work but is dilutted down so its safer for use by a novice.Murriatic Acid is much stronger and cheaper than CLR you can get a gallon for the price of a pint of CLR.Murriatic cleans up brass and copper that has corroision , oxidization and lime or calcium deposits.tks Wayne


From: eastern sierra Adj Services <esierraadj@xxxxxxxxx>
Reply-To: eastern sierra Adj Services <esierraadj@xxxxxxxxx>
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] Limeys !!!
Date: Wed, 8 Mar 2006 00:31:37 -0800
>There's some "NEW" product, I've seen advertised , somewhere, recently,
>that touts itself as being a "miracle" product , in its ability to
>remove , "instantly" hard-water/lime deposits, from windows, tile,
>etcetera....
>
>Anyone, out there in MoParland, seen this product, too????
>
>Neil Vedder
>
>
>*************************************************************
>
>To unsubscribe or set your subscription options, please go to
>http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1


From: Jim Hoekendijk <Jim.Hoekendijk@xxxxxx>
Reply-To: Jim Hoekendijk <Jim.Hoekendijk@xxxxxx>
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: Re: [FWDLK] glass problem and question
Date: Wed, 8 Mar 2006 08:48:36 +0100

John,

 

I?ve had a similar problem and remember the strain it caused when I tried to remove it with a razor blade from my many windows Vista Cruiser?

Finally I used a household cleaning solvent for removing lime deposit from taps. Because it?s lime deposit from the many years of rain that dried on the windows.

If it doesn?t remove it, it softens it, so removing with a razor blade is easier.

 

Jim Hoekendijk

The Netherlands.

 


Van: Forward Look Mopar Discussion List [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] Namens John J. Hertog
Verzonden: woensdag 8 maart 2006 0:04
Aan: L-FORWARDLOOK@xxxxxxxxxxxxx
Onderwerp: [FWDLK] glass problem and question

 

Hello there..

 

On my ?61, at the lower edge of the glass, where it meets either the gasket (if windshield or back window)  or where it meets the metal frame (if side glass), there is a layer of ?stuff? that just won?t come off ? on the OUTSIDE of the glass, only.  It appears that this ?film? was left there by leaves and various crap, as the car sat outside for years. It is NOT delamination of the glass ? it most definitely is on the outside.  It looks like whitish, frosty stuff? almost like what it would look like if the glass had been sandblasted.

 

It?s really strange, careful work with a razor blade will remove some of it, but it?s very slow and tedious. In some areas, the razor blade won?t even remove it.

 

Has anyone experienced anything like this and come up with a solution for getting rid of this crap ?   

 

John Hertog

Sag Harbor NY

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1


*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.