|
Hi
ALL,
I have this brake relining
machine in my building that has been setting there for a few years. It was
froze up in all the joints so I decided to put a little Kroil on the joints and
after a few days of that, I finally pressed down on he pedal and it went down
and I pulled it back up and sprayed a little more Kroil on the joints and it is
free as a goose now. I'm not trying to bring up things to loosen joints
again, but am asking if any one knows anything about this machine.
This is what the tag says
"Scandinavia Brake Relining Equipment" "No. S 39"
"Scandinavia Relining Co." "Distributors" "Newark, NJ" Cast
into the machine is "Riess MFG
Co".
It has an electric motor and
other parts with it all of which needs cleaned up.
Any information will be
appreciated or any one who used to use this type of maching.
Thank you in advance,
Jack Johnson in Shinglehouse, Pa where
Indian Summer had been great this past week---in the upper 50 and lower
60's Short sleeve shirts for Buck season????
*************************************************************
To unsubscribe or set your subscription options,
please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
| 
Back to the Home of the Forward Look Network