Re: [FWDLK] Oil Filler Tube / Crankcase Breather Pipe - '56 - '57 Dodge D500 Hemi

[Jim Hoekendijk <57_Super_D-500@xxxxxxxxxxxxxx>]

Title: Oil Filler Tube / Crankcase Breather Pipe - '56 - '57 Dodge D500 Hemi

Ed, Jim & Terry/Andree,

 

Right!

I applied some WD40, wiggled, applied some more WD40, wiggled some more…, and it finally came of.

Just a very tight fit! Leaves me with an acing back…

Thanx!

 

Jim

The Netherlands

’57 Dodge x2

 

---

Van: Forward Look Mopar Discussion List [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] Namens Jim Hoekendijk
Verzonden: zaterdag 28 juli 2007 12:43
Aan: L-FORWARDLOOK@xxxxxxxxxxxxx
Onderwerp: [FWDLK] Oil Filler Tube / Crankcase Breather Pipe - '56 - '57 Dodge D500 Hemi

 

Anyone know how to remove the Oil Filler Tube (or Crankcase Breather Pipe) from the engine block of a ’56 – ’57 Dodge D500?

The shop manual doesn’t say anything. The parts manual doesn’t show whether there’s a threaded connection.

Seems like it’s just a tight fit, and it should be loosened by blunt force, using something like an oil filter gripper.

But before I ruin anything…

Jim,

The Netherlands

’57 Dodge x2

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1