Re: [FWDLK] What is this ?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] What is this ?



  A #19 drill is .166 dia.  Drill sizes are also listed alphabetically a, b etc.

  Jim Faber  300B, 70 Challenger rag top
-------------- Original message from David Homstad <dhomstad@xxxxxxxxxxx>: --------------


> Ron,
>
> Any Machinist's Handbook could tell you what size a # 19 drill is, but I
> don't have one.
>
> Dave Homstad
> 56 Dodge D500
>
> -----Original Message-----
> From: Forward Look Mopar Discussion List
> [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx]On Behalf Of Ron Waters
> Sent: Monday, June 30, 2008 6:22 PM
> To: L-FORWARDLOOK@xxxxxxxxxxxxx
> Subject: [FWDLK] What is this ?
>
> My 58 Plymouth shop manual refers to a #19 drill when discussing the
> distance the carb choke should 'pull off' when the car is started. What is a
> #19 drill, or can anyone share what the thickness of this guy is so I can
> find a device to simulate the thickness ?
>
> Thanks,
>
> Ron
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.