Re: [FWDLK] What is this ?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] What is this ?



check here
http://www.engineersedge.com/drill_sizes.htm
John

----- Original Message ----- From: "David Homstad" <dhomstad@xxxxxxxxxxx>
To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Monday, June 30, 2008 5:09 PM
Subject: Re: [FWDLK] What is this ?


Ron,

Any Machinist's Handbook could tell you what size a # 19 drill is, but I
don't have one.

Dave Homstad
56 Dodge D500

-----Original Message-----
From: Forward Look Mopar Discussion List
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx]On Behalf Of Ron Waters
Sent: Monday, June 30, 2008 6:22 PM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] What is this ?

My 58 Plymouth shop manual refers to a #19 drill when discussing the
distance the carb choke should 'pull off' when the car is started. What is a
#19 drill, or can anyone share what the thickness of this guy is so I can
find a device to simulate the thickness ?

Thanks,

Ron

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.