Re: [FWDLK] heating problem cured on the 426 Interesting!!!!!!!!!!!!!!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] heating problem cured on the 426 Interesting!!!!!!!!!!!!!!



i have found this wire in poly block heads... on 2 occasions... saw no need so removed them, though they were not the cause of any problems... perhaps it was cast into the sand-negatives used to cast the heads,  interesting.
 
the flat 6's have a water distribution tube that generally rusts and no longer disperses water properly down the length of the block, causing overheating as well.... if any one has a hot running 6 out there...




Get the scoop on last night's hottest shows and the live music scene in your area - Check out TourTracker.com!

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1




Home Back to the Home of the Forward Look Network


Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.