Re: [FWDLK] 1956 Chrysler New Yorker Interior Door Handle/Window Crank R
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] 1956 Chrysler New Yorker Interior Door Handle/Window Crank Removal



Thanks John, Roger and Richard for your help!  From pictures and dimensions John sent to me, I made a tool out of a plastic putty knife to remove the door handles.  It was still challenging, but I was able to get them all removed so that I can have the fabric replaced on the door panels.

 

I got the fabric and carpet from SMS Auto Fabrics in Oregon.  The fabric was very expensive and some was soiled (the upholsterer was able to get the stains out) but the front carpet set didn’t fit well at all.  It is too short on the sides up against the kick panels (about ¾” on each side).  Does anyone have any suggestions for filling this gap?

 

Thanks again for all of your help!

 

Regards,

 

Eric

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.