Re: [FWDLK] Steering Wheel
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Steering Wheel



Hey Ron,

NAPA sells a product called "Plastic Weld" that is a two-part epoxy that
dries clear and is "runny" as well.  It should work great on your steering
wheel.

Jim Pennington

-----Original Message-----
From: Forward Look Mopar Discussion List
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of Ron Waters
Sent: Friday, January 30, 2009 2:41 PM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] Steering Wheel

Hey Gang -

I have a 59 Dodge two tone plastic (Bakelite?) steering wheel. From the
front, it looks real nice. But in back there is a 7" crack that runs across
the top--where sunlight baked it for many years. The crack is wide enough to
stick a fingernail into it. Before the plastic starts separating from the
metal core and before the plastic starts chipping off, I would like to
stabilize it using an epoxy or resin. The requirements are that it dry clear
and it be 'runny' so that it penetrates all the nooks and crannies of the
crack. Of course, it must also bond to the plastic permanently and probably
stick to the metal rim as well.

Can anyone recommend a product that meets this criteria ?

Thanks,

Ron

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.