Re: [FWDLK] A Question about the 303 poly?

[George McCollam <mccollamge@xxxxxxxxx>]

If you are talking cast iron 3 speed Torqueflite, the answer is yes as it it nearly a even swap. If you are speaking of the aluminum Torqueflite, then you need a transmission  adapter plate & parts (by T R Waters, or B&M or others) plus a modified rear transmission mount, sized drive shaft, longer speedometer cable and some other minor stuff. Bit is is again possible and it's been done before.
George

---

From: "MoparJimmy@xxxxxxx" <MoparJimmy@xxxxxxx>
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Sent: Wednesday, April 8, 2009 2:02:14 AM
Subject: [FWDLK] A Question about the 303 poly?

Can a 3 speed Tourqueflite fit where there is a 2 speed powerflite? I was asked this question by a guy who has a 56 Fury and I do not know this answer so I will come to those that might. Thanks

 

Jimmy

---

Feeling the pinch at the grocery store? Make dinner for $10 or less.

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1