Re: [FWDLK] Ain't it the truth....
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Ain't it the truth....



Pretty amazing how much action there is in a microsecond. That looked like single valve spring engine going 8000 RPM. Am I out of the loop, is that how modern engines are built? Seems contrary to what we used a few dozen years ago.

This one was on the same You tube page. Even though there is still a lot of motion, the inner vavle spring and the oscillation damper seem to quiet things down a bit. Don't know what the after market springs have, but my Mopar Performance cams have always come with the damper inside if you get a Hemi grind or above with single springs.

http://www.youtube.com/watch?v=i_NpzU4pGjc&feature=related


Bill Huff



At 9/3/200906:28 PM, Eastern Sierra Adjustment Svc wrote:
http://d.yimg.com/a/p/uc/20090903/largeimagetmsho090903.gif

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.