Re: [FWDLK] Powder Coating Removal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Powder Coating Removal



Hi Ron,
Couple of options- Sandblast it- though it will take some time (tough stuff
that powdercoating)
Strip it with oven cleaner (never tried this, but am told it will work)
Or- just scuff it and paint over it with the desired color.
You may also want to talk to a local powdercoater- they may know the proper
way to do this.

Your choice,
Charles.


-----Original Message-----
From: Forward Look Mopar Discussion List
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of Ron Waters
Sent: Monday, October 26, 2009 10:06 AM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] Powder Coating Removal

Hi All -

Someone gave me a clean master cylinder housing that had been powder coated 
a glossy brown color. I want to remove the powder coating. Does anyone know 
the recommended procedure for doing this ?

Thanks,

Ron 

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 8.5.423 / Virus Database: 270.14.32/2460 - Release Date: 10/26/09
08:10:00

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.