Re: [FWDLK] Powder Coating Removal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Powder Coating Removal



 You're going to have to bead blast it or burn it off. If properly cured it can't be cut by any solvent. You might try MEK or acetone, if it's not cured they may cut it.

 Jim Faber South Carolina

--- On Mon, 10/26/09, Ron Waters <ronbo97@xxxxxxxxxxx> wrote:

From: Ron Waters <ronbo97@xxxxxxxxxxx>
Subject: [FWDLK] Powder Coating Removal
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Date: Monday, October 26, 2009, 10:05 AM

Hi All -

Someone gave me a clean master cylinder housing that had been powder coated a glossy brown color. I want to remove the powder coating. Does anyone know the recommended procedure for doing this ?

Thanks,

Ron
*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1




Home Back to the Home of the Forward Look Network


Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.