Re: [FWDLK] dual carb linkage adjustment
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] dual carb linkage adjustment



Mike Apfelbeck wrote:
Normally, you adjust the link so the throttle blades are wide open on both carbs, with the gas pedal on the floor, the slot in the linkage will enable running on the back primaries in a progressive manner.

Mike

(as Long As You Have the front carb linkage in the 'correct' hole)
on my 57 Chrysler carbs there are 2 mounting hole locations on each carb. The 56 Set and the 58 set of Plymouth, and the 57 Desoto carbs I sold all had the same linkage attachment points I recall.

--
Paul Holmgren
Mine: 2 57 300-C's in Indy
Hers: 05 PT GT R/T HO Stage 1
Hoosier Corps L#6

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.