I have a 57 Plymouth with a 301 V8 and a 318 cam. The engine
was rebuilt 10,000 miles ago.
It appears when the engine was re-started after not running
for 4 years it might have had a sticky intake valve and bent a pushrod.
I need to replace the push rods and the old push rods appear
to be:
Cup and Ball
5/16" shaft
Overall Length 8.574" (8 9/16")
Wall thickness .060
Does anyone know where I can find new pushrods, possibly
with a thicker wall of .080
Summit Racing has a length of 8.53" could .004 be taken
out in the rocker arm adjustment (they have the .080 wall)?
http://www.ronhilbert.com/plymouth-maintenance.htm
Kind
Regards,
Ronald
D. Hilbert
President
Confluence
Internet Services, Inc.
Search
Engine Optimization, Analytics, Web Development, Design, SD Video &
Podcasting, Mobile Pages
530-755-2288
phone & fax
www.confluence-is.net
www.outdoortrips.info
www.outdoorguide.net
CONFIDENTIALITY
NOTICE: The information contained in this electronic mail is confidential
information intended only for the use of the entity or individual to whom it is
addressed. If the reader of this message is not the intended recipient, you are
hereby notified that any disseminations, distribution, retransmission or
copying of this message is strictly prohibited. If you have received the message
in error, please notify me immediately by reply transmission. Thank you.
Back to the Home of the Forward Look Network