Re: [FWDLK] 318 Poly

[Jim Rawa <jrawa@xxxxxxx>]

yeah- i gave away motors that were probably better than that one....  let me know when you need a 318- i'll make you visit!

 

btw-  i have 2 poly 318s and a 301 or 2... and 2 LAs to put the new crank in old block to use newer transmissions with modern flexplate or flywheel

a 301 is the same block at 3.91 bore- with new crank will be a 318

-----Original Message-----
From: Adam Lindenbaum <AdamL57@xxxxxxx>
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Sent: Sun, Jan 2, 2011 8:17 am
Subject: Re: [FWDLK] 318 Poly

Yeah, it'd be great if it was around $200 since it has bad compression and needs a rebuild. I do like the hydraulic clutch slave cylinder and the exhaust manifolds since I like using early 318s in cars they were never intended for. My next poly project is a 318 4 speed going in my Model A coupe. Eventually I want to put a 318 in my '59 ford F100, I might even do the truck before the A. See there is a way to make old Fords reliable.

Adam Lindenbaum

58 426 Hemi/4 speed Fury

'57 Savoy Kustom

'27 Ford Roadster pickup (318 V800 powered)

In a message dated 1/2/2011 12:56:48 A.M. Eastern Standard Time, whuff@xxxxxxxxxx writes:

http://cgi.ebay.com/ebaymotors/1967-Dodge-318-poly-V8-engine-hot-rod-Mopar-motor-_W0QQcmdZViewItemQQhashZitem27b7991b24QQitemZ170583989028QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1