Re: [FWDLK] Torqued off
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Torqued off



snip...
comment on stress risers---- i thought i screwed up big time in 2001, a little over 60,000 miles ago on my 59 fury.... while cutting out the y-pipe of the orig driveline- i found myself thinking, how come 1/2 way through the thin 1-7/8 pipe, wont it finish..??? then i noticed i was a good 16th into my pass side torsion bar...........


I wonder if WHERE the bar is damaged would have an effect on how much it is weakened or how much more it would be likely to fail? >I.E. in the middle or near the ends?

 I've never had one fail either, but I have considered using the blue wrench a couple times trying to remove one.

Bill Huff

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.