Thanks so much to all who responded! I now have a contact for both used and NOS drums, and if that doesn?t work out, I?ll convert to 4-wheel disk brakes. J
One more issue: My original 14-inch wheels will not fit around the new disk brake calipers. My shop is recommending I switch to 15-inch wheels, and use the 15-inch hubcaps from a 1956 Dodge ? but I?d much rather keep the ?57 look. Can anyone advise me on a 14-inch Mopar wheel, circa late 60s to mid-70s, that would accommodate disk brakes?
Anyone have a source for NOS or GOOD used rear brake drums for a 1957 Dodge Custom Royal?
**** OR ****
Can anyone point to the most compatible Mopar rear axle/brake assembly (circa late 60s to early 70s) that I can swap with the original?
Let me explain:
I just installed a disk brake conversion kit in the front and converted to a dual master cylinder (from a ?67 Dodge), but still need to replace the rear drums. The brakes are unique to Dodge for the 57-58 years only. From what I can find out, these drums are not being reproduced. I can?t locate NOS drums, and the used ones I looked at are too far gone. So . . . my remaining option is to swap out the entire rear end, so I?ll have an easier time servicing the brakes. The car is in great shape, but it?s not a trailer queen. I drive it ? a LOT ? so I need the brakes.
Can anyone help?
Thanks!
John Williams
Back to the Home of the Forward Look Network