|
Ed:
If you can get +60 pistons, it should
be possible to turn them down to the size you want.
John
In a message dated 7/12/2011 4:20:30 P.M. Eastern Daylight Time,
glpavlovich@xxxxxxx writes:
ED,
Adam is correct in that you will need a custom piston if
your other vendors
cannot supply the smaller overbore you need. I
have used ROSS for most of
my custom Poly pistons as well as
Venolia.
Keep us posted on what transpires.
Gary
Pavlovich
-----Original Message-----
From:
eddee@xxxxxxxxxxxxx
Sent: Tuesday, July 12, 2011 9:07 AM
To:
L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] PISTONS FOR A 350
Hello
Group
Does anyone have or specifically know of any one who has or can
make
+030 pistons for a 1958 350 PLYMOUTH.
Even +20 or +40 would be
fine.
I CAN GET +060s,,,,,,,,,,,,,,,,,,,but the bore is surprisingly
clean and
only needs +020 over.
I have checked with EGGE and OLD
TIME PARTS with no success
THANK YOU
ED ECKERSON
LI
NY
*************************************************************
To
unsubscribe or set your subscription options, please go
to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
*************************************************************
To
unsubscribe or set your subscription options, please go
to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
*************************************************************
To unsubscribe or set your subscription options,
please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 |
Back to the Home of the Forward Look Network