Re: [FWDLK] Problem wih Disc Brakes From a Conversion
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Problem wih Disc Brakes From a Conversion



Assuming that you assembled everything correctly, the only thing that I can think of is that you got some of the wrong grade bolts/washers.  When I was a Department of Defense inspector, we had a series of cases where bolts were wrongly marked, and failed.  They were too soft.
 
Joe Savard
Lake Orion, Michigan
 
In a message dated 7/25/2011 10:57:21 P.M. Eastern Daylight Time, walter.landry@xxxxxxxxxxx writes:
Did I miss something that I should be doing?

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.