Re: [FWDLK] 350 Block Questions
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] 350 Block Questions



Don't think that anybody's mentioned this, on this thread, but
the 350 B block was the standard engine on the 1958 Custom Royal
and Custom Sierra wagons.

The 361 single-4 bbl engine was the standard D500, with the
dual carb 361 as the Super D500 engine.

Neil Vedder



eddee@xxxxxxxxxxxxx wrote:

HI DAN
No bearing caps???
That is NG
You will have to get some from a 361 or 383 and have the block align bored to make it useable.

The 350 was one year only---1958
It was put in the GOLDEN COMMANDO PLYMOUTH--(could be ANY MODEL!!)

It was also used in MOSTLY the 2bbl version in base DESOTOS and MOSTLY a 4bbl version for DODGE and DODGE station wagons

I have 2 GOLDEN COMMANDO PLYMOUTH blocks,,,both are casting # of 1737629
That does not mean you dont have a 350.
There may have been more than one casting time and place for the 350.
The 361s had about 5 different casting numers throughout the years.

On the front pad of the block,,,along with the sn,,,should be what it was used for
ie: L-350 would be for the plymouth

Is your block UNUSED? Did you measure the bore???

HAVE FUN
ED ECKERSON

On Tue, Nov 22, 2011 at 1:55 AM, Dan Davids wrote:

  Today I picked up a 350 block from a fellow in  Everett, WA.
It's just a bare block -- no crank, bearing caps,  heads, etc.

Can you guys help me verify that it's the real  deal?
Here are the numbers on the block:

casting no. 1461416
date    7-15

no. on pad at front  5562119057
Is this the VIN from the car it came from? If so, what does it decode to?

Lastly, other than the 58 Fury, which other cars could have had 350s in them?

Thanks for any help.

Dan Davids
Woodinville, WA






*************************************************************
To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 <http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1>

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1


*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.