[FWDLK] ,59 Belvedere trans
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[FWDLK] ,59 Belvedere trans



Hi all, Thanks for feedback on my problem. I found out that the drive tube/sleeve between the T/Q and front pump only goes one way. If installed backwards it doesn’t go in the T/Q deep enough and sticks back 3/16” causing pressure on the pump gear and forcing it back into the valve body. Lesson learned “Pay close attention to parts orientation on dis-assembly” will prevent costly mistakes.

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

Help The Forward Look with every Amazon purchase by clicking here!
Help the Forward Look with every eBay purchase by starting your search here!




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.