Re: [Chrysler300] G Freeze Plugs
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] G Freeze Plugs



I like to use Permatex #1 aviation type (non-hardening) sealer, it works 
really well on both freeze plugs and pipe threads. Use a deep socket 
slightly smaller than the od of the plug and tap it in place, then you can 
"set" it with a blunt ended tool and a hammer. If it was up to me I would 
look around for a flanged style plug, they seem to hold a bit better. 
Freeze plugs are available in 1/64th increments, it may be worth your time 
to check to make sure the guy at the parts counter gave you the right size 
before you reinstall it.
Mike

At 12:47 PM 5/1/2004 -0400, Richard Osborne wrote:
>Good Afternoon,
>
>Yesterday afternoon we (Tom Miller and I) finally fired the G for the
>first time. About 4 to 5 minutes into the cam break-in, it spewed a
>freeze plug from the right side cylinder head.
>
>After a few adult beverages and a cool down, I easily popped the
>offending plug from the head. I was surprised to find a "flat" expansion
>plug. By this I mean that it doesn't have a flange.
>
>I just got back from Car Quest with a couple of similar style plugs. Am
>I correct in understanding that the insertion method is to "ping" the
>center of these to make it expand and seat propperly? After looking at
>the previously installed vs. the uninstalled, this appears to be the
>case (I paid the machine shop to do this about 3 years ago, so I wasn't
>the original installer.).
>
>Also, are these to be installed dry? It appearas as though the machine
>shop used some sort of tacky yellow colored stuff on the plugs when
>installed? Does this make sense. Of course, the machine shop was closed
>by the time all of this happened.
>
>Please advise if the concave shaped plugs are meant to be installed by
>hitting in the center as to expand the plug and if you recommend
>installing these dry or with some sort of sealer?
>
>I may try to put a temporary rubber plug in just to see how many others
>will pop out during operation. I'm not too sure I can get it in. We'll
>see.
>
>Best regards,
>
>Richard Osborne
>
>
>
>To send a message to this group, send an email to:
>Chrysler300@xxxxxxxxxxxxxxx
>
>For list server instructions, go to 
>http://www.chrysler300club.com/yahoolist/inst.htm
>Yahoo! Groups Links
>
>
>
>




------------------------ Yahoo! Groups Sponsor ---------------------~-->
Yahoo! Autos. Everything you need to know about buying 
or selling a car.  FREE Quotes, 360° Tours, Research,
Blue Book, Compare Vehicles, Buy Used
http://us.click.yahoo.com/kEZsdA/bwnGAA/YiGOAA/8LmulB/TM
---------------------------------------------------------------------~->

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
     Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.