[Chrysler300] 1962 Balancer/Pulley Scenario

["Matt Allyn" <mallyn@xxxxxxxxxxxxxxx>]

Hello All - 

On a 1962 300 with Air, there are 2 belt drive pulleys in front of the harmonic balancer and then pulleys for the power steering and fan in front of that. What would be the cause of the rear a/c pulleys moving forward of the balancer? In other words, the big center bolt can still be felt down there, but there is a good size gap between the front of the balancer and the rear of the a/c pulleys.

Before I go tearing into it, I just wondered if someone could refresh my memory...

Thanks!



[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/