Fw: [Chrysler300] Fw: Crysler 300 G 1961

["Tomas T" <14149@xxxxxxxxx>]

Good morning 300 club (Sweden time)

I have take out the lifter and push rods how long should each one be is there any parts number I can look to identified if they are the correct.



Tomas



----- Original Message ----- 
From: Don Verity 
To: Chrysler300@xxxxxxxxxxxxxxx ; Tomas Turovaara 
Sent: Monday, April 28, 2008 1:26 PM
Subject: Re: [Chrysler300] Fw: Crysler 300 G 1961


Probably installed late model lifters with original push rods. Late models are taller, so the valves won't seat unless you use matching push rods.
Don Verity 
Rhode Island USA
----- Original Message ----- 
From: Tomas Turovaara 
To: Chrysler300@xxxxxxxxxxxxxxx 
Sent: Monday, April 28, 2008 1:20 AM
Subject: [Chrysler300] Fw: Crysler 300 G 1961

Name: Tomas Turovaara
Address: Kengisgatan 33

981 33 Kiruna

Sweden

Ph: 46-980-14149 cell 46-70-5544890

Fax: 46-980-66404

E-mail work 15811@xxxxxxxxx

E-mail home 14149@xxxxxxxxx

Hi 300 Club 

I have some problems when I try to start my G after the engine have been rebuild by a restoration shop (not by myself) the engine has no compression in any cylinders. 

Have any one out there in the club any idea what can be wrong can they have pot the timing gearand chain in wrong position?

Maybe some one has have the same problem, let me know

Best regards from Tomas

----------------------------------------------------------
Jag använder en gratisversion av SPAMfighter för privata användare.
1143 spam har blivit blockerade hittills.
Betalande användare har inte detta meddelande i sin e-post.
Hämta gratis SPAMfighter idag! 

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]



 

-- 
Jag använder gratisversionen av SPAMfighter för privata användare.
 1143 spam har blivit blockerade hittills.
 Betalande användare har inte detta meddelande i sin e-post.
Hämta gratis SPAMfighter här: http://www.spamfighter.com/lsv


[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/