RE: [Chrysler300] Short lesson in thermodam
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] Short lesson in thermodam



OK, I get it.  But what is happening to the coolant that is retained in the
block waiting to go through the radiator?  It's temperature is going up
because it is held by the heat source longer.  The longer it's in the block
the hotter it gets, so where is the benefit in slowing down the flow?   If
it's just about TIME, that works both ways as I see it.  Besides, when an
engine is hot, the thermostat is fully open anyway.  Any thermodynamics
experts out there?  I've heard this point being debated for years and have
never had a good answer to fully explain what is happening.  It seems to me
to be all about surface area responsible for cooling not the speed of the
flow.
 
Bob J 

  _____  

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of james mcmullan
Sent: Tuesday, June 23, 2009 8:23 AM
To: Listserver
Subject: [Chrysler300] Short lesson in thermodam





Hi List .You cannot move Cold ,You can move Heat (ether in or out of
something) But it takes TIME .You haft to hold watter in the radiator long
enough for the heat to transfer to the core and be removed by air flow.That
is the the purpose of the thermostat .If the watter flows to fast it will
not have TIME to transfer heat Jim McMullsn 300 F. 

[Non-text portions of this message have been removed]






[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.