Re: [Chrysler300] 300F Brakes Again!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 300F Brakes Again!





Hi Terry,
Wrong master cylinder. Sounds like one for a manual brake car. You can only get them out with the unit in a vise.
Don
 
Sent: Thursday, July 31, 2014 8:23 PM
Subject: [Chrysler300] 300F Brakes Again!
 
 

Terry McTaggart here in Dayton OH.  New wheel cylinders, new master cylinder, new fluid, linings are great, all done by my local shop.  And I myself jacked the car up and adjusted all the brakes.  Car stops fine, but the pedal is low.  Shop manual says the adjustment for this is the pushrod from the brake assembly thru the firewall into the master cylinder.  But my car has a one-piece push rod, so there is no adjustment.  So Murray Park sent me the correct two-piece pushrod.  Inside the car, I disconnected the current pushrod from the brake pedal, but when  I attempted to slide the pushrod out, it would not come out, even when I used considerable force.  Looking at the manual, it should just slide out.  Anybody got any ideas as to why it won't come out?


__._,_.___

Posted by: "Don Verity" <d.verity@xxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.