|
Carl, What photo's are you referring to? My hose fits fine, would you like me to send you the pictures I just took? Bob J From: C Bilter [mailto:cbilter@xxxxxxxxx] Based on the photos I saw it doesn’t look right to me. Like Bob H said, it is an aftermarket hose not designed to go over the ram. Bob J got it to work by routing over the ram, but the sector end fitting doesn’t look like it was designed to attach that way, but what we really need is a photo of an original ram hose to be sure. Anybody got one? Carl B Sent: Tuesday, February 17, 2015 1:13 PM To: Bob Jasinski Cc: Chrysler300 Subject: Re: [Chrysler300] 300F power steering hose Hello Group, While out with my wife for a short summer's evening ride in July 2013, my hose blew. With duct tape and a quart of P.S. fluid, we cruised the 10 miles home just fine, although the engine compartment was an unholy mess. I called and spoke with either Gary Goers or Bob Hayen - response was that Gary wasn't stocking these hoses anymore, and that they were available more inexpensively through auto parts stores. I picked up a replacement at Napa, and installed it, incorrectly, under the ram. In retrospect, I should have kept the old hose because, by the look of the uniformly deteriorated rubber, it was likely the 53-year old original. So I see Bob J's comment about purchasing Gary's hose in '11, and also that Gary is stocking them now, but don't know if his current inventory is factory original design. Noel Hastalis 300F coupe Expecting -8 temps the next two days here in The WIndy City From: "'Bob Jasinski' rpjasin@xxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> I took some pictures of my Goers 300G PS hose installation. I can forward to those in need. Bob J From: David Schwandt [mailto:finsruskw@xxxxxxxxxxxxxxx] Some close-up pictures (Why can’t we bring this list server into the 20th century???) would really be helpful here of each end and the routing. I think a lot of the problem is the orientation of both ends into the reducer. From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of 'Bob Jasinski' rpjasin@xxxxxxxxxxx [Chrysler300]
Bob J From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of 'Robert Hayen' robert554@xxxxxxxxxxxxxx [Chrysler300]
you might have to give the line that goes into the pump a gentle tug to get it to not hit the battery tray . but all in all it works! bob
Carl Bilter From: mailto:Chrysler300-noreply@xxxxxxxxxxxxxxx
gary has these hoses in stock ready for shippment.. i just asked him this morning on this subject ..
bob hayen .... 55 degrees here in kalispell montana . the birds are chirpping , the sun is shining out of controll. yaaaaaaaaaaaa!!!!!!
Wish I did, Jan as I could use one also. Dave Schwandt -----Original Message----- Hello all. Anyone know of a source for the Power steering pressure hose for ------------------------------------ To send a message to this group, send an email to: To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or For list server instructions, go to For archives go to Yahoo Groups Links
__._,_.___ Posted by: "Bob Jasinski" <rpjasin@xxxxxxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |
Back to the Home of the Forward Look Network
Archive Sitemap