Re: [Chrysler300] 300G clutch fan
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 300G clutch fan





Hayden 2705 should fit at least 1960 through 1965 (probably 1959 as well); in other words, all the 413 cars.  I can attest that it fits great on a J.  The diameter might be larger than factory original.  The 2705 is thermally activated.  A running change from non-thermal to thermal occurred during the 1963 model year as summarized on our web site:  http://www.chrysler300club.com/tech/fan.htm
 
Carl B
 
Sent: Monday, June 15, 2015 10:47 AM
Subject: Re: [Chrysler300] 300G clutch fan
 
 

It is possible the Hayden 2705 may work on some of the later Letter cars. I have to admit to having a relatively small knowledge base about the later cars, and I just don't know. The 2705 is 0.80" taller (longer) than the thermally activated clutches I am preparing, and it's also about 3/4" larger in diameter.
 
The large diameter may look odd, but that should not affect its ability to get the job done. However the 0.80 longer dimension will not fit between the water pump and the radiator on the '57-'58, and perhaps several later models as well.
 
Measure your car carefully before you rip it all apart in your driveway, only to find you've got a part that won't work.
 
Keith Boonstra
 
-
 
 
 
On Mon, Jun 15, 2015 at 6:55 AM, Bob Merritt bob@xxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
 

I have an old note.
(everything I have is old)

It says Hayden 2705.

That might be the number you are looking for.


On 6/15/2015 6:49 AM, 'Michael Reed' rmreed@xxxxxxxxx [Chrysler300] wrote:
 



I found a Hayden fan clutch at NAPA a few years ago that is 100% bolt-in on my "F". It fit perfectly. I'm assuming (perhaps falsely) that the "G" fan clutch is the same, or the same specifications. I'll look for the Hayden part number today, and post it if I can find it.
 
Hayden did have a comprehensive specification listing for all their fan clutches online. I don't find it now.

Mike Reed in Hastings, Michigan

----- Original Message -----
Sent: Sunday, June 14, 2015 10:43 PM
Subject: Re: [Chrysler300] 300G clutch fan
 
 
The NAPA number for the Jag fan clutch is 274328, in the TEM line.  Fits various Jaguars, sixes and V12s 1985-96.  The one on my G fits fine, although it had to do some enlarging of the bolt holes when I used the same number on my 59 Plymouth fitted with a 383.  Cost is around $50/60 locally, $85/90 list.

-----Original Message-----
From: "Michael Falcone mjf175@xxxxxxx [Chrysler300]"
Sent: Jun 14, 2015 8:33 PM
To: chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] 300G clutch fan

 

I remember in the past someone mentioned a Jaguar clutch fan fit the 300G,  has anyone tried this and do you remember what year Jag the fan was from. Or does anyone else know of where to buy a fan that would fit. Thanks

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.6030 / Virus Database: 4360/10019 - Release Date: 06/15/15


 


__._,_.___

Posted by: "C Bilter" <cbilter@xxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.