Re: [Chrysler300] 300 F won't shut off

Wiring of the two S wires at starter switch can get crossed . Or other wires . Usually because ign switch area wires changed to push on trrminals due to failed ign sw plug on .Complicated what happens there .normal Ign and acc power goes away at start , (!!) kills radio heater etc --but power to start car , ign power then goes into coil end of ballast R via one of those S wires while key is held . Regular ign wire is dead at start . Other one starts starter relay . If coil being fed incorrectly 12v via that coil end ballast wire , Will not shut off .

Maybe this helps you ?

Sent from my iPhone

On Jul 2, 2015, at 10:31 PM, Ray Jones 1970hurst@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

If they happened together, it sounds like you are powering the Ignition system thru the clock.
Unhook the clock and see if the car will suet off then.
Ray

On Thu, Jul 2, 2015 at 12:45 PM, sbeard2@xxxxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Hello 300 ites,

Got a problem I have not had before.

Once you start the car, you can not use the key to turn it off. Installed new starter, starter relay switch and new ignition switch. Only thing new that I have hooked up is a clock from Jeff Carter.

Another weird thing is that the new clock worked for a few minutes then quit working?

Any help would be much appreciated.

Have a great 4th of July.

Steve beard

300F in Delaware, Ohio

--
Ray Jones. Y'all come on down an see us. Ya hear?

__._,_.___

Posted by: John Grady <jkg@xxxxxxxxxxxxxxxxx>

To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

New Members 1

• Privacy • Unsubscribe • Terms of Use

__,_._,___