Re: [Chrysler300] Brake shoe retainer/hold down spring - G

["Ray Jones 1970hurst@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Have you checked your local parts house?

This kinda thing is readily available at any of the 4 parts houses here in Mena.

These springs, pins and cups are generic, I believe, and fit thousands of cars.

Even if they don't have a kit listed for your car, check what they have for fit.

I just bought kits for the rear of my Hurst, and I'm sure the hold downs are the same as any I have ever installed.

The kits may differ due to the other springs included, which may be different from model to model, but the shoe hold down is the same.

Ray

On Sun, Aug 9, 2015 at 11:05 AM, 'Rick Vitek' rpvitek@xxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Looking for the brake shoe retainer spring hardware (nail, 2 cups, coil spring) for a G. Don't see it listed for this application on internet searches. Does anyone know of a source? I imagine this retainer length was used on other applications and would be willing to get a hardware set for that other application.

Thanks.

--

Ray Jones. Y'all come on down an see us. Ya hear?

__._,_.___

---

Posted by: Ray Jones <1970hurst@xxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___