[Chrysler300] On the road, again. 1964 Bulkhead connector question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] On the road, again. 1964 Bulkhead connector question





This is a test of the emergency Chrysler 300 Club, International broadcast network.  640, 1240 Conelrad.  Bzzt, bzzt, bzzt.

 

I just re-upped and I’m checking to see if I can get back online with you and receive your pearls of wisdom.

 

A question on the bulkhead connector on the 1964 Chrysler 300K:  Is it possible to remove the terminals at the ends of the dash loom from the backside (passenger compartment side) of the bulkhead connector?  If so, is there a special tool or technique for removing these terminals without damaging them?

 

Rich Barber

Brentwood, CA



__._,_.___

Posted by: "Rich Barber" <c300@xxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap